Installing vinyl wrapping on a vehicle really takes
knowledge and skill. In most cases, this work is done by several expert
individuals. The process involves coming up with appropriate graphic design,
preparing the vehicle for the wrapping, and using the best tools to get the job
done the right way.
If you are someone passionate about cars and designing, this
can be a good business opportunity to explore. As long as you are willing to
undergo training, you can learn how to do this properly.
Those who have worked in this industry for years will attest
that it is crucial to have images of the vehicle before doing any design. This
is important in order to ensure that certain design elements fall in the right
places. Most of the time, the vehicle's natural lines are used. Door panels, on
the other hand, are best for covering overlaps.
Part of the preparation for the vehicle is to clean it with
soap and water. The car should be allowed to dry for at least 24 hours.
Degreasing the vehicle is another aspect that should not be neglected.
Isopropyl alcohol can be used or you may also utilizea fast drying panel wipe.
Solvent printed media, on the other hand, should be allowed
at least 48 hours to outgas. It is recommended that the rolls are left standing
on a vertical position. When degassing is done correctly, the adhesive will
have higher quality and the graphic designs will not be a hassle to fit.
During the lamination process, it is advisable that cold
rollers are used. Extreme roller tension is strongly discouraged. Hard squeegee
is a good tool especially when applying velvet strip. Changing the velvet often
can be helpful in preventing scratches.
When doing the actual vinyl wrapping, experts find it a lot
better to begin with the panel's flat parts and then work from side to side. It
would be easier to stay consistent the vinyl's level that way. Complicated
areas should be handled on the latter part of the installation process.
Spreading the tension on the vinyl itself should be paid
attention to. That's the main reason why pulling outwards from the biggest
parts of the vinyl is important as you stretch it. The same thing can be said
when it comes to using extra heat for the purpose of softening and stretching
the wrapping. That way, the graphics remain intact and any form of distortion
is prevented.
